TP 100 Forte

Intensive cleaner for commercial vehicles, construction equipment etc.

Product description

Alkaline cleaner concentrate with extremely intensive cleaning effect, thanks to its high dirt-release capacity.
Dissolves and removes even stubborn grease and oil-based dirt as well as soot and silage deposits.
Due to its particularly suitable composition, TP 100 Forte has a demulsifying effect in sewage and industrial water treatment systems and can therefore be classified as easily separable (tested in accordance with ecological standard 5105).
Its washing active substances are fully biodegradable in accordance with the detergent regulation.
TP 100 Forte is THE solution for the exterior cleaning of all types of commercial vehicles, such as trucks, construction equipment, agricultural vehicles and tanks. The product can also be used for the intensive cleaning of machines, containers and in the shipbuilding industry.

Technical data

Form: liquid
Colour: neutral
Density at 20°C: 1.09 g/cm³.
pH-value (10 g/l) at 20°C: ~ 11.6

Important components

5 - 15 % non-ionic surfactants,
< 5 % NTA (nitrilotriacetic acid) and its salts,
< 5 % anionic surfactants,
< 5 % phosphonates, odorants, lime

Application

High-pressure device

Suck in the pure product and dose it to obtain 0.25% to 0.2% in the cleaning jet.

Sprayer

Depending on the degree of soiling, premix 1:3 to 1:20 with water and spray the mixture onto the surface to be cleaned.
After a few minutes of action (approx. 3 - 5 minutes), rinse the surface thoroughly with a strong water jet or high pressure.

Temperature

Cold or warm

TP 100 Forte is ideally applied by spraying, which achieves an optimal result. It is important to ensure that the product does not dry out (note: on surfaces heated by the sun or exposed to direct sunlight). To avoid streaks, always work from the bottom up. Be careful with varnishes and old red varnishes (test in a hidden place).